The Stopper is a positioning device for T-track, which can improve machining accuracy and efficiency by fixing and positioning items. When using T Track Stopper, the correct fixing method and adjustment method are very important, which can ensure the precise positioning and fixing of the workpiece, thereby improving processing efficiency and quality. In this article, we will introduce the fixing method and adjustment method of T-slot miter rail jig, hoping to help you use T Track Stopper better.
Fixing method of T Track Stopper
There are usually two ways to fix the T-slot miter rail jig:
Handle fixing method: The handle fixing method is a common fixing method. By rotating the handle, the workpiece can be clamped. When using the handle fixing method, you need to pay attention to the following points:
Make sure the handle turns smoothly and should not be too tight or too loose.
When clamping the workpiece, it is necessary to properly adjust the force of the handle to ensure that the workpiece can be firmly fixed on the T-shaped track.
Screw fixing method: screw fixing method is a firmer fixing method, which is suitable for workpieces that require precision machining. When using the screw fixing method, you need to pay attention to the following points:
Make sure the length and diameter of the screws match the T-track, not too long or too short.
When fixing the workpiece, it is necessary to properly adjust the strength of the screw to ensure that the workpiece can be firmly fixed on the T-shaped track.
How to adjust the T Track Stopper?
The adjustment methods of T Track Stopper are usually as follows
- Adjust stop position
When using the T-slot miter rail jig, if the position of the workpiece is not correct, the position of the stopper needs to be adjusted. When adjusting the position of the stopper, pay attention to the following points:
- Make sure the handle of the Stopper is released.
- Adjust the position of the stopper until the workpiece is in the correct and stable position.
- Fix the stopper and adjust the handle strength to ensure that the workpiece can be firmly fixed on the T-rail.
- Adjust handle strength
Using the The Stopper, it is necessary to properly adjust the strength of the handle to ensure that the workpiece can be firmly fixed on the T-shaped track. Adjusting the strength of the handle, you need to pay attention to the following points:
- Make sure the handle rotates smoothly.
- Adjust the handle strength until the workpiece is securely seated on the T-rail, but not too tight or too loose.
- Replacement parts
Using the T-slot miter rail jig, if the stopper or other accessories are damaged or worn, they need to be replaced in time to ensure the normal use of the T Track Stopper. Replacing accessories, pay attention to the following points:
- Make sure that the size and model of the new accessories match the original ones.
- When replacing accessories, you need to follow the instructions to ensure correct and stable installation.
In short, the fixing method and adjustment method of The Stopper are very important, which can ensure the precise positioning and fixing of the workpiece, thereby improving the processing efficiency and quality. When using T-slot miter rail jig, you need to choose the appropriate specification and model according to the specific processing project and wood product, and pay attention to the fixing method and adjustment method during use. By using the T Track Stopper correctly, the workpiece processing efficiency can be improved, the processing safety can be enhanced. And the processing quality can be improved.